System Sensor’s 882 smoke detector is a 2-wire conventional profile plug-in detectors aimed to meet the performance criteria designated by UL. The design for these detectors emphasizes economical and highly reliable. A LED will latch on when the detector is in alarm to provide a local alarm signal. The (-) IN and (-) OUT terminals are short circuited inside the detectors. When the detector is mounted, it will continue the wire to the next device or EOL resistor. When it is removed, the wire will be open for wiring supervision.
Home > Products > Fire Detection and Alarm Systems > Smoke Detectors > System Sensor Smoke Detector 882
- Diameter: 10.2 cm (4″)
- Height(including base): 4.8 cm (1.8″) for Heat
5.0cm(2.0″) for Photoelectronic - Operating Temperature Range: 0~38°C (32°F to 100°F) for Heat
0~49°C (32°F to 120°F) for Photoelectronic - Operating Humidity Range: 10% to 93%Relative Humidity, Non-condensing
- Max. Air Velocity: 20m/s (Heat only)
- Latching Alarm: Reset by momentary power interruption
- Sensitivity: 63°C (145.4°F) Fixed (Heat only)
- Operating Voltage: 8.5~30 VDC for Heat
8.5~35 VDC for Photoelectronic - Standby Current: ≤50μA for Heat
≤90μA for Photoelectronic - Alarm Current: Min. : 2 mA for Heat; 10mA for Photoelectronic
Max.: 80 mA for Heat; 130mA for Photoelectronic
